A rotary-screw compressor is commonly used to replace a piston compressor where large volumes of high-pressure air are required. Typically they are used for larger industrial applications or for high-power tools that use air e.g. a jackhammer.
A characteristic of its motion is there is less pulsation or flow surge with a rotary-screw compressor compared with a piston model. This means they are smoother running, have less vibration and do not require spring suspension. However, many rotary screw compressors are placed on rubber mounts to dampen high-frequency vibrations, particularly compressors that have high rates of rotation.
ENERGY Series variable speed rotary screw compressors allows for power savings on average between 30%-40% over conventional controlled compressors. ENERGY Series allows for an air supply with minimal peaks, in doing so supplying only the air required for production minimising service costs and operating costs. Designed to operate in the harshest working conditions 24 hours per day.
THE PERMANENT MAGNET ENERGY Series offers high energy savings of up to 40% over standard controlled machines. Due to the installation of the permanent magnets motor, service life is extended and reliability is improved. The use of advanced technology in the design and research, together with thermodynamics and pneumomechanics has produced the permanent magnet energy range.
TRINITY MK2 series compressors replaces the traditional compressed air systems, incorporating filtration, refrigerated air dryer, air receiver with an energy efficient air end. TRINITY MK2 is ready for immediate installation with no additional piping or wiring. Having a small foot print and low noise allows for the TRINITY MK2 to be installed in the immediate workplace meeting all Occupational Health and Safety regulations.
The INDUSTRIAL series has been designed to operate in the most demanding of conditions. They are supplied with an integrated Dryer and Filtration system or without. Low running costs high air output and a heavy duty drive system from the electric motor to the air end allows for low maintenance costs. Paramount in the design of the INDUSTRIAL Series was quality and the ability to supply a constant and reliable air supply in the most arduous of environments.